Hitec Lynx 3D User Manual download pdf (Page 2)

Congratulations on your purchase of the Lynx 3D computer controlled pistol grip system.

Take time to familiarize yourself with these instructions for quick and easy setups and fine

tuning adjustments need at your track. Now, prepare to take a step into a new dimension of

control with the Lynx 3D from Hitec!

Table of Contents

Pg. 1 Introduction / External Switches

Pg. 2 Physical Features / Reference Guide

Pg. 2 Electronic Features / DCX Receiver

Pg. 3 03MC Receiver / Changing Frequencies

Pg. 3 Battery Charging / Left Hand Operation

Pg. 5 Programming Flow Chart

Pg. 6 Edit Mode Access / EPA

Pg. 7 Model Reset / Model Copy / Model Select

Pg. 8 Timer / Idle Up

Pg. 9 Anti-lock Brakes / Aux. Ch. 3

Pg. 10 Servo Reversing / Exponential

Pg. 12 Auto and Standard Dual Rate

Pg. 13 Trims / Brake Depth / Steering Wheel Tension

Pg. 14 DSC / Driving Tips / Final Thoughts

External Switches and Their Usage

1. Power switch: Powers the system

2. Display switch: Allows programming without powering the RF signal.

3. Idle up switch: Used with gas or nitro vehicles to increase the idle speed at engine start up.

Switch position right is “ON”.

4. Dual rate switch: Selects between *auto dual rate (left) and standard dual rate (right).

5. Throttle trim: Adjusts the neutral point of the throttle and brakes.

6. Steering trim: Adjusts the neutral point for the steering.

Programming Buttons for LCD Screen

7. Edit up/down: Accesses the menu when pushed simultaneously and is used in scrolling through

the menu to select the area to program.

8. Data inc/dec: Adjusts setting when accessing the menu.

9. Aux +/-: Used for CH. 3 and changing data in selected menus.

Handle Switches

10. Dual Rate Adjust: Selects the amount of travel the steering servo will turn.

11. ATL: Used to adjust the maximum amount of braking that will be applied when the brakes are

fully engaged. Note: This is also the EPA (End Point Adjustment) for the brakes.

Physical Features

1. Removable transmitter frequency module.

2. External charging jack: Port for charging NiCads with the supplied “overnight” charger.

3. Battery door: Access to the transmitter NiCad battery box.

4. Wrist strap mount: For connecting optional wrist or neck strap, part # 58311.

5. Brake depth adjustment screw: Limit the amount of physical brake lever travel.

6. Wheel tension adjustment screw: Increases or decreases the steering wheel tension.

7. D.S.C. (Direct Servo Control): Controls the receiver directly via the DSC Cable.

8. Right/Left hand operation: Transmitter head can be adjusted for right or left hand use.

1 2 3 4 5 6 7 ... 15 16

Comments to this Manuals

No comments

Hitec Lynx 3D User Manual Page 2

Comments to this Manuals

Related products and manuals for Toys Hitec Lynx 3D