Hitec Zipper User Manual download pdf (Page 3)

Flying Your Aircraft

• You should only y at an ocial model aireld.

• Check that other pilots and spectators are positioned safely before ying your model.

• Wait for other pilots to land their models if they are ying already.

• Do not y the plane behind yourself or others.

• Do not y under the inuence of alcohol or drugs or if you are feeling ill.

• Do not y during thunderstorms or high wind.

• Do not y in an area where people are gathered or near tall buildings.

• Do not y near streets or where vehicles or trains pass by.

• Do not y near explosive materials.

• Do not y near power lines or transmission towers.

• Be sure to do pre-ight safety checks of the model before ying.

• Always remember that the pilot is responsible for any outcome that may occur during the

ight.

The Weekender Zipper is a Plug and Play-type model where additional items are required for

operation. The items listed below are needed to y:

• 6-Channel Radio and Receiver

• 2 - 3S, 7.4 ~ 11.1V, 400 ~ 500 mAh LiPo battery

• Charger Suitable for the Battery Above

Features

• Durable pre-painted EPO airframe, easily

assembled in less than 45 minutes

• Powerful preinstalled brushless outrunner

motor and 10-amp ESC

• Preinstalled nano servos

• Removable canopy for easy access to

motor and ESC

• 6+ minute runtimes with recommended

battery

Specications

• Wingspan: 23.6 in (600 mm)

• Length: 21.3 in (541 mm)

• Weight: 5.3 oz (150 g)

• Wing Area: 93 sq in (6 dm

)

• Wing Loading: 8.2 oz/sq ft (25 g/dm

)

FEATURES AND SPECIFICATIONS

ITEMS REQUIRED TO READY THIS MODEL FOR FLIGHT

The Zipper comes unnished but can easily be painted with commercially available enamel paints. When

painting, you should use multiple light coats to avoid damaging the foam or adding too much weight.

MODEL FINISHING

1 2 3 4 5 6 7 8

No comments

Hitec Zipper User Manual Page 3